TVCB Mounted Cantilever Sliding Gate Set - Rapid Deployable, Re-usable - Manually Operated or Fully Automated
Our Fast-Tech® FT-SGC-T-01 Sliding Gate Set has been meticulously designed to address the most challenging of requirements with the utmost simplicity. For a rapidly deployable, reusable and temporary installation, this is the only solution needed.
SECURITY LEVEL: Low to High
Supplied as a plug&play unit, the gate set arrives fully assembled and ready to bolt in place; connect it into your new or existing access control network.
The finish is class A (hot dip) galvanised and polyester powder coated or shot blast and a marine specification multi-layer epoxy treatment to the RAL colour of your choice to ensure an unrivalled longevity.
Designed in-house, the Fast-Tech® FT-SGC-T-01 Sliding Gate Set is expertly fabricated in the UK in our principle Fastline factory to ensure we maintainfull control over the quality and to allow us unbeatable service in the production and modification of the standard units if required.
Requiring no dug foundations, fully supported by our Fastline® TVCB blocks; the perfect safety barrier for a huge variety of applications including many types of temporary works and flood defence walls. They also make ideal Vehicle Security Barriers (VSBs), Vehicle Containment Barriers (VCBs) and can be used for Hostile Vehicle Mitigation (HVM).
Cast from high strength concrete (50N/mm2) which and combined with Highways Agency specification steel reinforcing. Our system meets the component requirements of EN 1317 Compliant Road Restraint Systems for Temporary Safety Barriers, *when installed by a Highways Agency approved contractor.
A crane off-load and place service is available.
Our cantilever sliding gate set is the ideal high quality, cost effective solution for achieving wide spanning clear openings.
Aesthetically pleasing, easy to install, robust and at a price to suit almost any budget.
Data sheet available for download below (Additional Information section).
our Sliding TVCB Gate - Cantilever comes with a F10 Fastline 10 Year Guarantee
The unit is hot dip galvanised to BS EN 10346:2015 and polyester powder coated to BS EN 13438:2013. Where leaf lengths exceed that suitable for hot dip galvanising, we utilise a marine suitable shot blast and multi stage epoxy coating system to ensure longevity. The finish colour to your choice with an option for contrasting leaf/ post colours to assist with DDA compliance.
All Fast-Tech® products undergo rigorous multi-stage inspections to ensure conformity to the above standards and contribute to our product guarantee. Our Fast-Tech® FT-SGC-01 gate set is manufactured in house to exceed all current legislative requirements. When requested, the plug & play module is provided to confirm with guidance as stated in BS EN 12453:2017.
We have multiple quality control check stages to ensure that our products and our service are of the highest standard without exception.
We are ISO 9001 certified and are subject to regular audits (BSI, BSE/CE, BRE) to ensure continual compliance.
We use our own in-house transport and are proud carriers of DVSA Earned Recognition status which sets us apart in our industry.
Our vehicles are tracked to ensure regular delivery updates can be offered. We are completely in control of our fleet and are able to schedule/ re-schedule deliveries to suit the urgency of your requirement.
We have a skilled team of design engineers who ensure that all details offered are suitable for your requirements. In conjunction with our uniquely talented fabricators, any requirement can be accomodated
Drawings are issued and approved prior to fabrication to ensure the materials are as expected. Setting out can commence prior to receipt of materials and drawing files are avaiable in the format of your choosing (.dwg, .pdf, .stp) to enable ease of integration with your/ your Client's drawings package.
Operating from numerous national factories (our main production facility being in the West Midlands), we fabricate all of our products in house to ensure full control over.
We continually invest in state of the art equipment to ensure we remain at the very pinacle of our industry.
The result is unrivalled lead times, quality, service and price.
CAD Design
We have a skilled team of design engineers who ensure that all details offered are suitable for your requirements. In conjunction with our uniquely talented fabricators, any requirement can be accomodated
Drawings are issued and approved prior to fabrication to ensure the materials are as expected. Setting out can commence prior to receipt of materials and drawing files are avaiable in the format of your choosing (.dwg, .pdf, .stp) to enable ease of integration with your/ your Client's drawings package.
Manufacturing
Operating from numerous national factories (our main production facility being in the West Midlands), we fabricate all of our products in house to ensure full control over.
We continually invest in state of the art equipment to ensure we remain at the very pinacle of our industry.
The result is unrivalled lead times, quality, service and price.
Galvanising and Powder Coating
The unit is hot dip galvanised to BS EN 10346:2015 and polyester powder coated to BS EN 13438:2013. Where leaf lengths exceed that suitable for hot dip galvanising, we utilise a marine suitable shot blast and multi stage epoxy coating system to ensure longevity. The finish colour to your choice with an option for contrasting leaf/ post colours to assist with DDA compliance.
Quality Control
All Fast-Tech® products undergo rigorous multi-stage inspections to ensure conformity to the above standards and contribute to our product guarantee. Our Fast-Tech® FT-SGC-01 gate set is manufactured in house to exceed all current legislative requirements. When requested, the plug & play module is provided to confirm with guidance as stated in BS EN 12453:2017.
We have multiple quality control check stages to ensure that our products and our service are of the highest standard without exception.
We are ISO 9001 certified and are subject to regular audits (BSI, BSE/CE, BRE) to ensure continual compliance.
Tracked Delivery
We use our own in-house transport and are proud carriers of DVSA Earned Recognition status which sets us apart in our industry.
Our vehicles are tracked to ensure regular delivery updates can be offered. We are completely in control of our fleet and are able to schedule/ re-schedule deliveries to suit the urgency of your requirement.
Additional Information
This product can be provided to conform to the stated standard; please state this at the point of enquiry and our team will be more than happy to advise to ensure full compliance to any specification.
See separate Terms & Conditions for guarantee compliance.
